Print this page

Name: Ileana N


NAME: Ileana N
IMO: 9554042
BUILT: 2010 April, China Changliang National Shipping Jinling Shipyard - Nanjing (Hull Nr JLZ 070425)
TYPE: Dry Bulkcarrier, Dolphin 57
CLASS: BUREAU VERITAS, Class notation I *HULL * MACH Bulk carrier CSR BC-A
FLAG: Marshall Islands
NOTE: (Holds No.2,4 may be empty) ESP GRAB [20] Unrestricted navigation *VeriSTAR-HULL; *AUT-UMS; MON-SHAFT; INWATERSURVEY

Summer SW 56,717.7 mts @ 12.800 m moulded / tpc 58.80 mt
Winter SW 55,147.0 mts @ 12.533 m moulded / tpc 58.70 mt
Tropical SW 58,291.0 mts @ 13.067 m moulded / tpc 58.90 mt

LOA/LBP: 189.99 m / 185.00 m
Breadth (moulded) 32.26 m. Depth (moulded) - 18.00 m.

(International 1969): 33,044 / 19,231
Suez Canal : 33,919.94 / 31,284.96
Panama Canal NT : 27,390

Main engine MAN-B&W 6S50MC-C 1 set MCR 9,840 kW

Speed/Consumption At Sea

BALLAST-Abt 14.00 knots on abt 30.5mts IFO(380)incl.aux.+0.2mt ULSMGO per day
LADEN - Abt 14.00 knots on abt 32.5 mts IFO(380)incl.aux.+0.2 MT ULSMGO per day

ECO Without Guarantee

BALLAST - Abt 12.50 knots on abt 24.5mts IFO (380) including auxiliaries + 0.2mts ULSMGO
LADEN - Abt 12.50 knots on abt 26mts IFO (380) including auxiliaries + 0.2mts ULSMGO

Vessel burns ULSMGO when manoeuvring in confined waters and for starting d/gens or low load and incinerator.

Consumption in port:
When idle - abt 2.0MT IFO 380CST+0.20 MT ULSMGO /day
When working - abt 5.0 MT IFO 380 CST + 1.00 MT ULSMGO/day (basis 24 hrs working)

CUBIC CAPACITIES: Total 71634.10 CBM grain,
HOLD 1: 13,009.86 CBM
HOLD 2: 15,333.25 CBM
HOLD 3: 14,553.08 CBM
HOLD 4: 15,333.27 CBM
HOLD 5: 13,404.64 CBM
TTL : 71,634.10 CBM

5 holds/5 hatches
Hatch covers: 4 panels per hatch, end folding type, double skin, hydraulic cylinder operated.

Uniform Strengths: (Homogeneous cargo loading conditions)
Tanktops local strength:
No. 1 hold 25.0 mt/sq.m.
No. 3 hold 25.0 mt/sq.m,
No. 5 hold 25.0 mt/sq.m.,
Nos 2 & 4 holds 20.0 mt/sq.m.
No cargo to be loaded/stowed on mdeck and hatch covers.

Holds Dimensions:
Hold No. 1: L27.88 m X B 32.26 m X H 16.76 m
Hold No. 2: L31.16 m X B 32.26 m X H 16.72 m
Hold No. 3: L29.52 m X B 32.26 m X H 16.72 m
Hold No. 4: L31.16 m X B 32.26 m X H 16.72 m
Hold No. 5: L29.52 m X B 32.26 m X H 16.72 m

Holds' tank-top dimensions, excluding lower stools, bulkhead corrugations etc(all figures approx only wog):

Hold No.1: Length 27.75m Width aft bulkhead 23.73 m, fwd bulkhead 10.54 m
Hold No.2: Length 28.58 m, Width 23.73 m.
Hold No.3: Length 26.95 m. Width 23.73 m.
Hold No.4: Length 28.62 m, Width 23.73 m.
Hold No.5: Length 26.95m, Width at aft bulkhead 8.90m,at fwd bulkhead 23.73m
Hatch opening: H#1:18.86 m (L) x 18.26 0 m (W) H# 21.32 m (L) x 18.26 m(W)

Cargo Gear:
4 units electro/hydraulic deck cranes each 30 tonnes SWL,
Working radius at swl 30mt 20m. Maximum clear outreach 11.00mtrs.
Cranes capable of use in grab operation. When cranes on grab or on skip/bucket duty maximum gross lifting limited to 24mt (ttl weight of grab or skip/bucket and cargo). No more than 1 ship's crane to be worked simultaneously at a hatch.
Owners will not supply crane men from crew.
Vessel's cranes designed and class approved to operate within the designated capacities/parameters
(for further details refer to makers' instruction manual) only in a harbour or sheltered waters environment with no significant movement of the ship due to wave action, nor any relative movement between crane/grab and cargo if loading/discharging into/from barges, transhipment or similar environmental conditions to be less than beaufort force 2 , sea state 1.-
Ambient temperature for cranes operation: -10degrees C to +40degrees C.

Grabs: 4 X 12.5 cbm peiner electro hydraulic
(adjustable to 6.0 to 12.5 maximum capacity - max cgo density 2.5mt/cbmt)
suitable for bulk cargoes with material grain size min 1.00mm - max 50.00mm

IFO: 2000cbm abt bss 90%
ULSMGO: 120cbm abt bss 90%
Ballast capacity: excl.floodable H#3-16,333.35cbm (floodable H#3 capacity-14,553.1 cbm)

Fresh water capacity: 465 M3 BSS 100%

Natural Holds' ventilation
Cement holes per hold: 2 (diameter: 700 mm)
Co2 fitted in holds
Aussie hold ladder fitted
No. 3 hold can be ballasted

All details given on approximate basis and without guarantee, for more detail please contact