Print this page

Name: Plate Queen

Description:

NAME: PLATE QUEEN
IMO: 9371074
MMSI: 538005164
CALL SIGN: V7BL7
BUILT: OSHIMA SHIPBUILDING CO.LTD SEPT 2007
TYPE: Bulkcarrier
CLASS: Bureau Veritas, Class notation: I, Hull, Mach, Bulk carrier, ESP -non homload
FLAG: Marshall Islands
NOTE: Strengthened for the carriage of heavy cargoes, Holds nos 2 and 4 holds may be empty.


DRAFTS AND DEADWEIGHTS:
Summer 55,649 mts @ 12.502 m extreme/tpc - 56.01
Tropical 57,106 mts @ 12.762 m extreme/tpc
Fresh 55,650 mts @ 12.787 m extreme/tpc
Winter 54,193 mts @ 12.242 m extreme/tpc

Panama canal dw at 12.03mtrs tropical fw : abt 51,200mt

DIMS AND TONNAGES:
LOA/LBP : 189.99 m / 185.94 m
Breadth (moulded) : 32.26 m.
Depth (moulded) : 17.62 m
Design Draft : 11.00
Scantling Draft extreme (at summer): 12.502 m.
GRT/NT: (International 1969): 30,665 / 18,543
Suez Canal : 30,042.42 / 29,585.35
Panama Canal NT : 25,444

Main engine: KAWASAKI MAN B&W 6 S 50MC-C

SPEED AND CONSUMPTION:
Speed/Consumption at Sea
BALLAST - BALLAST - Abt 14.50 knots on abt 31mts IFO (380) including auxiliaries+ 0.1mts ULSMGO
LADEN - Abt 14.00 knots on abt 31mts IFO (380) including auxiliaries + 0.1mts ULSMGO

ECO Without Guarentee
BALLAST - Abt 13.00 knots on abt 24mts IFO (380) including auxiliaries + 0.1mts ULSMGO
LADEN - Abt 12.50 knots on abt 24mts IFO (380) including auxiliaries + 0.1mts ULSMGO

Vessel burns ULSMGO when manoeuvring in confined waters and for starting d/gens or low load and incinerator.

Consumption in port:
In Port When idle - abt 2.3tonnes IFO + 0.5mts ULSMGO
When working - abt 5.0 tonnes IFO (basis 24 hrs working) + 0.5mts ULSMGO

HOLDS AND HATCHES:
Grain Bale
H# 1 11,150 / 11,053
H# 2 16,322 / 15,996
H# 3 14,060 / 13,754
H# 4 14,889 / 14,621
H# 5 13,451 / 13,374
-----------------------------------
TTL 69,872 / 68,798
(Note: above bale capacity is calculated basis of 600 x 600 x 600 mm bale
cargo)
Holds/Hatches: 5 holds/5 hatches,
Hatch covers 4 panels per hatch, end folding, double skin - hydraulic cylinder operated

Uniform Strengths : ( Homogeneous loading conditions)
Tanktops local strength: Holds nos 1: 24.5 mt/sq.mtr
2, 4 : 15.5 mt/sq.mtr
3 : 26.9 mt/sq.mtr
5 : 22.8 mt/sq.mtr

Main deck : c.h No 1: 2,43mt/m2 and from c.h.No2 to No.5: 3.40mt/m2 (excluding cross- decks)
Hatch Cover : No loads allowed
No cargo to be loaded/stowed on mdeck and hatch covers.

HOLDS AND HATCHES (DIMENSIONS):
Tank-top dimensions, minimum excluding lower stools, bulkhead corrugations etc.
Hold No 1 Length 26.90m, Width fwd bulkhead 8.60m, mid 17.00m, aft 22.00m
Hold No 2 Length 31.00m, Width 22.00m
Hold No 3 Length 28.00m, Width 22.00 m.
Hold No 4 Length 30.00m, Width 22.00 m.
Hold No 5 Length 30.40m, Width fwd bulkhead 22.00m, aft 8.60m
Hatch 1 opening - 16.74m (L) x 18.60 m (W),
Hatches 2, 5 opening -22.32 (L) x 18.60 m.(W)
Hatches 3 opening -18.60 (L) x 18.60 m.(W)
Hatches 4 opening - 21.39 (L) x 18.60 m.(W)

CRANES:
Cargo Gear:
4 units electro/hydraulic deck cranes each 30 tonnes SWL,

Working radius at swl 30mt 26 mtrs , Maximum clear outreach 9.8mtrs.
Cranes capable of use in grab operation. When cranes on grab or on skip/bucket duty maximum gross lifting limited to 24mt (ttl weight of grab or skip/bucket and cargo). No more than 1 crane to be worked at hatches.

Owners will not supply crane men from crew.
Vessel's cranes designed and class approved to operate within the designated
capacities/parameters(for further details refer to makers' instruction manual)
only in a harbour or sheltered waters environment with no significant movement
of the ship due to wave action, nor any relative movement between crane/grab
and cargo if loading/discharging into/from barges, transhipment or similar
environmental conditions to be less than Beaufort force 2 , sea state 1.
- Ambient temperature for cranes operation: -10degrees C to +40degrees C.

GRABS:
Grabs: 4 X 7 cbm electro hydraulic,
Maker/Type :Tobu Jukogyo Co/EHSH-70X .Maximum cargo density 1.6mt/cbmt.

TANKS:
-HFO: abt 1,618 CBM bss 90 pct capacity
-ULSMGO: abt 159.3 CBM bss 90 pct capacity
-FW: abt 347.6mt

OTHER FITTINGS:
-Natural ventilation
-Cement holes per hold: 2 (diameter 750 mm)
-Aussie holds ladder fitted
-Hold nbr 3 can be ballasted

All details given on approximate basis and without guarantee, for more detail please contact