Print this page

Name: Aramis

Description:

NAME: MV ARAMIS
IMO: 9593359
MMSI: 538004630
CALL SIGN: V7YD2
BUILT: JAPAN - IHI MARINE UNITED INC, KURE SHIPYARD, 05 APRIL 2012
TYPE: Bulk Carrier ,IHI design , name - 'THE FUTURE 56'
CLASS: NIPPON KAIJI KYOKAI (NKK), CLASS NOTATION: NS*(CSR, BC-A, BC-XII, GRAB 20, PSPC-WBT)(ESP)(IWS) MNS
FLAG: Marshall Islands
NOTE: STRENGTHENED FOR HEAVY CARGO LOADING WHERE HOLD NOS. 2 & 4 MAY BE EMPTY.

DRAFTS AND DEADWEIGHTS:
Summer 55,830 mtrs @ 12.735 m Extreme/tpc 56.935 mt/cm
Fresh Water 55,824 mtrs @ 13.023 m Extreme/tpc 57.02 mt/cm
Tropical 57,340 mtrs @ 13.000 m Extreme/tpc 57.01 mt/cm
Winter 54,322 mtrs @ 12.470 m Extreme/tpc 56.86 mt/cm
Panama Canal abt 50,000 mtrs @ 12.039 mtrs

DIMS AND TONNAGES:
LOA/LBP: 190.00 m / 185.00 m
Breadth(mld): 32.26 m
Depth (mld): 18.10 m
Assigned Summer Draft: 12.735 m
GT/NRT (1969): 31,541 / 18,765
Suez Canal Gross / Net: 32,499.92 / 30,042.34
Panama Canala NT: 26,163
Main Engine: DU-WARTSILA,Type 6RT-flex50, MCR 8,890 KW / NOR 7,110 KW

SPEED AND CONSUMPTION:
Speed/Consumption at sea:
At sea:
-Ballast: Abt 14.50 knots on abt 30 mts HFO (380) including auxiliaries + 0.1mts ULSMGO
-Laden : Abt 14.00 knots on abt 30 mts HFO (380) including auxiliaries + 0.1mts ULSMGO
Vessel burns ULSMGO when manoeuvring in confined waters and for starting d/gens or low load and incinerator.
Eco speed / consumptions Without Guarantee
-Ballast: Abt 13.00 knots on abt 23.5 mts HFO (380) including auxiliaries + 0.1mts ULSMGO
-Laden: Abt 12.50 knots on abt 23.5 mts HFO (380) including auxiliaries + 0.1mts ULSMGO

In port:
-Idle: abt 2.3 mt HFO 380 cst + abt 0.5 mt ULSMGO
-Working: abt 5.0 mt HFO 380 cst + abt 0.5 mt ULSMGO (bss 24 hrs working)

HOLDS AND HATCHES:
Holds' Cubic Capacities
Grain / Bale:
H#1 12,060.43 / 11,042.22
H#2 15,706.72 / 14,650.88
H#3 14,777.22 / 13,775.41
H#4 14,770.43 / 13,812.35
H#5 14,747.66 / 13,781.41
-------------------------------
TTL 72,062.31 / 67,062.27
(Note: above bale capacity is calculated basis of 600 x 600 x 600 mm bale cargo) Holds/Hatches: 5 holds / 5 hatches

Hatch covers hydraulically operated, four (4) panels, fwd/aft end folding type
Uniform Strengths: (Homogeneous type of cargo loading conditions)
Tanktops local strength: Holds nos 1-2-3-4-5 = 26.5 mt/sq.mtr
Main deck: 3.50 mt/sq.m (excluding cross-decks)
Hatch Cover: Hatch 1:2,8 mt/sq.mtr
Hatches 2-3-4-5: 2.1 mt/sq.m.
No cargo to be loaded/stowed on mdeck and hatch covers.

HOLDS AND HATCHES (DIMENSIONS):
Tank-top dimensions, minimum excluding lower stools, bulkhead corrugations etc (abt wog)
CH 1: L=27.2 m , Width Fwd=11.0 m
At dist fm Fwd Blkhd=10.4 m , W=21.0 m
At dist fm Aft Blkhd=4.0 m , W=23.8 M
W Aft: 23.8 m
CH 2: L=29.0 m , Width Fwd=23.8 m
CH 3-4: L=27.2 m , W=23.8 m
CH 5: L=27.2 m, Width Fwd: 11.0 m
At dist fm Fwd Blkhd=5.0 m, W=27.2 m
At dist fm Aft Blkhd=10.5 m , W=18.6 m
W Aft: 10.7 m
Hatch 1 opening - 14.56m (L) x 18.60 m (W) Hatches 2 to 5 opening -20.93 (L) x 18.60 m (W)

CRANES:
Cargo Gear:
-Maker/Type: IHI MARINE, H300190-260
-4 units electro/hydraulic deck cranes each 30 tonnes SWL
-Working radius at swl 30mt 26 mtrs
-Maximum clear outreach 9.87 mtrs
Cranes capable of use in grab operation. When cranes on grab or on skip/bucket duty maximum gross lifting limited to 24mt (ttl weight of grab or skip/bucket and cargo). No more than 1 ship's crane to be worked simultaneously at a hatch.
-Owners will not supply crane men from crew
-Vessel's cranes designed and class approved to operate within the designated capacities/parameters (for further details refer to makers' instruction manual) only in a harbour or sheltered waters environment with no significant movement of the ship due to wave action, nor any relative movement between crane/grab and cargo if loading/discharging into/from barges, transhipment or similar environmental conditions to be less than Beaufort force 2, sea state 1.
Ambient temperature for cranes operation: -10degrees C to +40degrees C.

GRABS:
Grabs: 4 X 12 cbm , Type: Hook ?on / Radio-controlled,Opening single rope
Maker: Tobu Jukogyo Co.Ltd, Model RFHC-120 /60x5
Volume capacity: adjustable 12/6 cbm cargo density min/max 0.8/2.3 mt/cbm
Suitable for bulk cargoes with material grain size minimum 2.00mm -50.00mm

TANKS:
-HFO: abt 1980 m3 bss 90% capacity
- ULSMGO: abt 195 m3 bss 90% capacity
-FW: abt 311 m3

OTHER FITTINGS:
-Natural ventilation
-Cement holes per hold: 2 (diameter 700 mm)
-Aussie holds ladder fitted
-Hold nbr 3 can be ballasted

All details given on approximate basis and without guarantee, for more detail please contact