Print this page

Name: KP Albatross

Description:

NAME: KP ALBATRPSS
IMO: 9552367
MMSI: 538005974
CALL SIGN: V7IQ2
BUILT: Kawasaki Sakaide Shipyard. Japan, December 1st 2010
TYPE: Geared Bulk Carrier
CLASS: NK (Nippon Kaiji kyokai) Classification NK NS *(CSR ,BC-A,BC-X II,GRAB 20)(IWS) (ESP) and MNS* (MO)
FLAG: Marshall Islands
NOTE: "Strengthened for the carriage of heavy cargoes,
Holds nos 2 and 4 holds may be empty."


DRAFTS AND DEADWEIGHTS:
Summer 58,743 mt/12.676m extreme/tpc 59.5 mt/cm
Tropical 60,309 mt/12.939m extreme/tpc 59.5 mt/cm
Fresh 58,739 mt/12.966m extreme/tpc 59.5 mt/cm
Winter 57,173 mt/12.412m extreme/tpc 59.4 mt/cm

DIMS AND TONNAGES:
LOA/LBP : 197.0 m / 194.0m
Breadth (moulded) : 32.26 m
Depth (moulded) : 18.10m
Design Draft : 11.30m
Summer Draft:12.676m
GRT/NT: (International 1969): 33096 / 19142
Suez Canal : 33828.55 / 30952.82
Panama Canal NT : 27435
Main engine: KAWASAKI-MAN B&W 6S50MC-C7 TYPE X ONE SET, 8630KW

SPEED AND CONSUMPTION:
Speed/Consumption at Sea
BALLAST : Abt 14.00 knots at abt 32mt HFO (380) including auxiliaries + 0.1mts ULSMGO
LADEN : Abt 13.50 knots at abt 32mt HFO (380) including auxiliaries + 0.1mts ULSMGO

Eco speed as a guide, but without guarantee:
BALLAST : Abt 12.50 knots at abt 23mt HFO (380) including auxiliaries + 0.1mts ULSMGO
LADEN : Abt 12.50 knots at abt 25mt HFO (380) including auxiliaries + 0.1mts ULSMGO

Vessel burns ULSMGO when manoeuvring in confined waters and for starting d/gens or low load and incinerator.

Consumption in port when:
idle : abt 2.7mt HFO 380cst + abt 0.2 mt ULSMGO
working : abt 5.0mt HFO 380cst + abt 0.2 mt ULSMGO (basis 24 hrs working)

HOLDS AND HATCHES:
HOLDS CUBIC CAPACITIES (in cbmtrs):
Grain/ Bale incl. hatch coamings
H/1 13,649.9/13,140.1
H/2 15,913.5/15,322.6
H/3 14,778.0/14,152.4
H/4 15,909.6/15,320.8
H/5 13,363.2/13,027.5
TTL: 73,614.2/70963.4

Holds/Hatches: 5 holds/5 hatches,
Hatch covers 4 panels per hatch, end folding, double skin - hydraulic cylinder operated
Dimensions of holds(clear opening inside coaming)
Uniform strengths : (homogeneous cargo loading conditions)
-Cargo hold tank top:H # 1&5 = 21mt/sqmtr,H# 2&4 16mt/sqmtr, H#3 24mt/sqmtr.
(Suitable for froklift up to 38mt of axle load) .
-Main Deck : 3.50 mt/sqmtr (excluding cross decks)
-Hatch covers : Hatch 1 = 4.1 mt/sqmtrs / Hatches 2-3-4-5 = 3.5 mt/sqmtr
No cargo to be loaded/stowed on main deck and hatch covers.

HOLDS AND HATCHES (DIMENSIONS):
Tank-top dimensions, minimum excluding lower stools, bulkhead corrugations etc.(abt wog)
Hold No 1 Length 26.10m, Width fwd bulkhead 10.53m,aft 28.73m
Hold No 2 Length 29.20m, Width 24.05m
Hold No 3 Length 27.30m, Width 24.05m.
Hold No 4 Length 27.30m, Width 24.05m.
Hold No 5 Length 27.30m, Width fwd bulkhead 24.05m, aft 13.10m/12.73m
Hatch 1 opening ? 18.270m (L) x 18.600 m (W), Hatches 2 to 5 opening -20.880 (L) x 18.600 m (W)

CRANES:
Cargo Gear:
4 units electro/hydraulic deck cranes each 30.5 tonnes SWL,
Working radius at swl 30mt 28 mtrs , Maximum clear outreach 11.87mtrs.
Cranes capable of use in grab operation. When cranes on grab or on skip/bucket duty maximum gross lifting limited to 24mt (ttl weight of grab or skip/bucket and cargo). No more than 1 ship's crane to be worked simultaneously at a hatch. Owners will not supply crane men from crew.
Vessel's cranes designed and class approved to operate within the designated
capacities/parameters(for further details refer to makers' instruction manual)
only in a harbour or sheltered waters environment with no significant movement
of the ship due to wave action, nor any relative movement between crane/grab
and cargo if loading/discharging into/from barges, transhipment or similar
environmental conditions to be less than Beaufort force 2 , sea state 1.
- Ambient temperature for cranes operation: -10degrees C to +40degrees C.

GRABS:
Grabs: 4 X 12 cbm
Maker: TOBU JUKOGYO CO., LTD
Type: Hook-On?/Radio controlled opening single rope.
Model: RSHC-120 / 60x5 (12 / 6cbm)
Empty weight: 9.0mts
Adjustable from 6.0 to 12.0cbm max capacity - max cargo bulk density at 2.3mts/cbm
Suitable for bulk cargoes with material grain size min 2.00mm - max 50.00mm

TANKS:
-HFO: abt 2019.9mt bss 100 pct capacity
- ULSMGO: abt 140.2mt bss 100 pct capacity
-FW: Fresh water tank=196.2mt Drink water tank=196.2mt

OTHER FITTINGS:
-Natural Holds' ventilation
-Cement holes per hold: 2
-Aussie holds ladder fitted
-Hold nbr 3 can be ballasted

All details given on approximate basis and without guarantee, for more detail please contact